I'm still sort of burnt out from making dirt roads, but still haven't jumped into the water and started making rivers. So, I made a few curves (bor-ing!), and a little roadside scene: a gas station.
The station and its roof were made from a block of Polymer clay. For the roof, I flattened out some clay and then pressed it onto the bottom of the small metal mitre box. The bottom is corrugated, and seemed to be of the right scale. I peeled the clay up and then baked. I was pretty happy with the effect. The main body of the station was roughly cut out of clay and the door and windows gouged out.
The gas pumps, the little tank on the side of the building, and the sign were made out of styrene plastic. The word GAS on the sign is not centered; I should not have used superglue to attach it. Its probably hard to tell, but on the other side of the building I have two metal drums from Heroics & Ros against the wall and a tire that I made out of a styrene tube, which was a lot more work than it was worth.
The station is mounted on a sheet of styrene that was covered over with latex caulk. The roadside scene is to connect up with the other road pieces.
This going to be the last road piece for awhile. I want to get started on my rivers.
