Bit of a Slump

I have not had much energy in terms of the hobby lately. Part of it is that school has started again for both the boy and me. I have been getting prepared for classes and Daddy's Taxi Service is already racking up the miles. But even when I get to sit down at my hobby work bench at night, I just stare at things on the table. 

I might have said this before, but I think a big part of the issue is that I cannot make my projects simple. For example, I keep trying to add more and more details onto my little pre-dreadnought ships. I spend a lot of time fussing over how to build a better model. The same goes with painting figures. I should, but I can't be satisfied with table top ready figures. One of the main reasons why I switched from 25/28mm to 15mm was to speed up painting armies. If I look at the 15s that I did 20-25 years ago, they are fairly basic in the level of painting. No shading or highlighting. Now, they are far more detailed, even the rank-and-file troops. I think pumping in a lot energy into detail causes burn out. 

I know I sound like a broken record (can people still relate to this metaphor?), but I need to just start gaming with what I have.  

Hot Glue Stick Turrets

As I have mentioned previously, I struggle with making ship turrets and especially gun shields for my pre-dreadnought project. I have not been happy with the material used to make them. Rubber erasers sort of work, but even these are not perfect. 

Facebook posts these short videos (I assume they come from Tik Tock, or maybe segments from YouTube videos) that show people making tiny pieces of furniture, bicycles, and other objects out of scrap material. There is one guy in particular who uses hot glue sticks to make things. He isn't using them to glue things together but as material for when he needs a circular base. I started playing around with the glue sticks. It seemed to have similar properties to an eraser, but better. What I noticed was that its solid but not that hard to cut.  It seems harder than an eraser but is a little easier to slice. I can poke holes in it and it won't potentially tear, and when stuck a piece of wire into a hole to make a gun, the glue stick didn't deform as much as an eraser. This is particularly important when using thin slices to make gun shields. 

Results of my experiments 

First up is a basic cylindrical turret. One of the advantages of the glue stick over wood and cardboard is that I can line up the wires better so that they are more parallel. Very often the guns will not be parallel next to each other when using other other material. The translucent stick makes it easy to watch and control the angle of the needle as I poke holes in. 

The next type is a oval turret. After cutting consistent cylinders, I sliced off the edges on either side of the cylinder and then angled the end where the guns went into. One of the advantages of the glue stick over the eraser is that you can push and pull on the wire guns to help line them up better. An advantage of both the eraser and the glue stick is that you don't need to apply any glue to hold the guns in place. I doused the turret closest to the camera with superglue, but it didn't help one way or another. I think I was pretty consistent with slicing off the edges of the cylinder, but I think I can do better if I use a razor blade rather than my craft knife. 

Finally, I made some gun shields using the cut offs from the turrets above. I still need to practice but I think they are a big step up from what I have experimented with up to this point. The "carvibility" is equal to an eraser and there was much less distortion the shield when I pushed the wire through to make the gun.  

Final thoughts

I used mini glue sticks that have a diameter of 0.7mm. Standard glue sticks have a diameter of 12mm. I will probably buy a pack of the standard. It will give me a little more area in which to carve different shapes and give a little more surface area to build triple turrets or use slightly heavier gauged wire. I wish there was an even smaller diameter of glue stick. That would be useful for smaller turrets and things like sponsons. 

I have not glued the turrets to anything yet and was a little worried about whether superglue will stick to solid hot glue. However, the people making their little objects use superglue all the time to glue them in place so it should not be an issue. I do not expect painting to be an issue either. I think paint will hold to the glue fine.