Friday, August 10, 2012

15mm Sci-Fi Small Dwelling

I slapped together a small dwelling for my sci-fi adventures in Yogurt Town.


I used the container from a Kraft Foods Lunchable. It is made from styrene, so plastic modelling glue works well on it. One lunchable will give about three separate containers once you cut them out. The door was cast from Durham's Water Putty and featured in a  previous post. The air conditioning unit, or whatever it is on the roof is a juice bottle lid. I made the poorly-squared window by cutting out the frame from sheet styrene and then inserting a piece of plastic embroidery mesh for the bars of the window. I couldn't decide what to paint the dwelling, so I just did it in grey. I have not decided on whether or not to base it. One thing about the lunchable container is that its walls are very thin. It is easy to move around on the gaming table, and anything you glue on it may pop off if the walls are flexed. So before I started on the outside, I filled the container with Durham's Water Putty. It took a few days because I did it in layers. To reduce the amount of putty I needed, I waded up some aluminum foil into a ball and stuck it in before filling it up with the putty. When dried, the walls no longer flexed and it is heavy enough to stay put on the gaming table.

2 comments:

  1. Looks great! I like the idea to put the juice bottle cap on the roof as an a/c type unit. I've been saving them for making sci-fi buildings too, but couldn't think of where/how to use them.

    ReplyDelete
    Replies
    1. Thanks! I normally use them to mix paint, or to make up my own washing using Future floor wax and black ink.

      Delete